Add 30-Second Skip
The following technique can be used to map an unused or unneeded button on the “silver” remote to the 30-second skip command. Current versions of the i-Guide software will skip forward 30 seconds into a recording when this command is sent. A good choice is the ‘A / Lock’ button since many users don’t need that function; you can feel both the ’15-second-back’ and ’30-second-skip’ buttons with one finger and move between them without looking. Another option is to reprogram the ’15-second back’ button, since PgDn already provides that functionality. Some users have found, however, that double-clicking the play button results in a 30-second skip forward.
1. Press the “Cable” button at the top of the remote to put it into Cable Box control mode.
2. Press and hold the “Setup” button until the “Cable” button blinks twice.
3. Type in the code 994. The “Cable” button will blink twice.
4. Press (do not hold) the “Setup” button.
5. Type in the code 00173.
6. Press whatever button you want to map the 30-second skip command to (ex: A / Lock). The “Cable” button will blink twice if successful.
Note: This did not work on boxes with the Microsoft TV Foundation Interface (previously used in Washington State, but now converted back to the i-Guide software). As of firmware version 12.22 Insight Cable disabled this feature, but has been re-enabled in firmware version 16.35. Comcast software Version 73.44 disabled this feature, but the latest software, Version 74.53-3321, re-enables it (this has been confirmed on the 3416 w/ 16.20 firmware). See software for more info.
Note: As of software A25.2-2, the Page Up key is removed from some operators and others have programmed it as a 5 min skip.
Note: This code does work for the PACE TDC577X (vegas) standard def DVR with Comcast service (SW version 75.69-a25p2-2S1.r-8).
